©
Install_CelmerSL100P - All specification and suggested dimension is for reference only- subject to change without further notice.
1
MAG SL100ACx series is a complete sliding gate automation system.
Components in MAG SL100DCx series
Preliminary check
To ensure trouble-free operation, make sure that the gate (whether existing or yet to be installed) has the following
specification:
•
Max gate weight 600kg
•
Strong and rigid leaf frame
•
Flat leaf face, with no protruding parts and no vertical members
•
Straight, smooth and even movement of the least over its entire travel
•
No sideway oscillation of the leaf
•
Upper and lower sliding system in perfect condition
•
The use of floor tracking with a rounded channel is preferred because it reduces friction in the sliding
movement
•
Only two slide wheel
If any welding or brazing is required on the gate, it should be done before installing the automation system. The
condition of the gate structure will have direct affect on the reliability and safety of the automation system. We are
ready to install SL100P after making sure all the above items are checked.
Application note
1 PVC
box
2 Control
board
3 Motor
4 Limit
switch
5 Mounting bracket
6 Base
plate
7
Limit switch stopper
8 Gear
rack
9
Key to unlock clutch
10
Pinion gear
11
Alan key to release clutch
12
Spacer (with screw tread)
13
Bolt
14
Remote control transmitter
15
Remote control receiver
SL100DCx series – Sliding gate system
Installation guide
Gate Automatic System
