GDI COMMUNICATIONS Extreme Copper XC-RP300 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 40

background image

WARRANTY

GDI Communications LLC.

warrants to the original consumer/purchaser that each of its

hardware products, and all components thereof, will be free from defects in materials and/or
workmanship for one (1) year from the date of original purchase. This warranty is not
assignable.

In the event a malfunction or other indication of failure is attributed directly to faulty
workmanship and/or materials, GDI Communications LLC. will, at its option, repair or replace
the defective product or components to whatever extent it shall deem necessary to restore the
product or components to proper operating condition, provided the end-consumer/purchaser
returns with the defective product, proof of the original date of purchase. Please note that
GDI Communications LLC. may replace the defective product with a new or re
manufactured, functionally equivalent product at their option.

The customer shall be solely responsible for the failure of any GDI Communications LLC.
computer product, or component thereof, resulting from accident, abuse, or misapplication of the
product, and GDI Communications LLC. assumes no liability as a consequence of such
events under the terms of this Warranty.

GDI Communications LLC. does not warrant the merchantability or fitness of this product for
any particular purpose. This limited warranty is in lieu of any and all other warranties, expressed
or implied.

GDI Communications LLC.'s liability shall not exceed the price of the defective individual
product, which is the basis for a claim. In no event will GDI Communications LLC. be liable for
direct, indirect, incidental, or consequential damages resulting from any defect in the product or in
this manual, even if they have been advised of the possibility of such damages. In no event shall
GDI Communications LLC. be liable for loss of any profits, equipment, facilities, programs, data or
the cost of recovering or reproducing any programs or data. Some states do not allow the
exclusions or limitation of implied warranties or liability for incidental or consequential damages, so
the above limitations or exclusions may not apply to you.

i

«
1
2
3
4
5
...
»

Содержание Extreme Copper XC-RP300









































Отзывы:

Нет отзывов

Похожие инструкции для Extreme Copper XC-RP300

Бренд: S&P Страницы: 18

Safe-T FURNACE HC-445

Бренд: Pelonis Страницы: 6

Excel Aqua Plus

Бренд: TEFAL Страницы: 8

Бренд: Toyostove Страницы: 18

Бренд: i4Home Страницы: 2

Бренд: RADtec Страницы: 8

Бренд: Eminent Страницы: 14

HI FLOOR DESIGN

Бренд: Argo Страницы: 5

Бренд: Thermofilm Страницы: 8

Бренд: Empire Страницы: 18

Бренд: Warm Tech Страницы: 67

Бренд: Frico Страницы: 12

Бренд: Dimplex Страницы: 3

Бренд: Mr. Heater Страницы: 104

Бренд: Lasko Страницы: 4

Бренд: ECG Страницы: 60

Бренд: Clarke Страницы: 16

Бренд: Telwin Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды