DU-MND–0013-01 Rev A 9/28/10 GCX Corp. Pagina 6 di 10
4.3 Posizionamento del braccio VHM nella guida
Attenzione: quando il braccio è caricato con uno strumento, non provare a rimuoverlo dalla guida.
4.3.1. Bloccare il braccio nella posizione verticale più alta usando il pomello di bloccaggio dell'altezza.
4.3.2. Usando la chiave esagonale da 3,17 mm [1/8''] appositamente fornita, allentare le 4 (quattro) viti di serraggio nella
guida.
4.3.3. Alleggerire il peso della strumentazione montata spingendo verso l'alto la parte inferiore del braccio nelle vicinanze
della strumentazione. Contemporaneamente, spingere in alto o tirare in basso l'estremità opposta del braccio
immediatamente prima del carrello e spostarla nella posizione desiderata.
4.3.4. Serrare le 4 (quattro) viti di fissaggio per bloccare la posizione del braccio nella guida.
La strumentazione
deve essere montata
Fare attenzione quando si disinserisce il pomello di
bloccaggio dell'altezza. Il carico montato può
essere aumentato (aggiunta di apparecchiature) o
diminuito (asportazione di apparecchiature) mentre
il pomello di bloccaggio dell'altezza era inserito,
causando un improvviso movimento del braccio
verso l'alto o verso il basso.