Aruba Networks AP-200-MNT-W2, Руководство по установке

Страница: 1 / 7

AP-200-MNT-W2 Mounting Kit
Installation Guide
0511650-04 | October 2014 1
Package Contents

Mount Housing

Mounting Bracket

Drill Template

RJ45 Cable Adapters (2)

#6 Machine Screws (4)

Pan Head Screws (4)

T6 Torx Security Screw

AP-200-MNT-W2 Mounting Kit Installation Guide
Introduction
The AP-200-MNT-W2 mounting kit provides a secure solution for mounting your AP to flat surfaces such as
a wall or ceiling, and is also compatible with single and dual gang wall boxes. The mounting bracket can be
rotated within the mount housing to accommodate both the 103 and 204/205 AP models.
Attaching the Mount Housing
Installing the Mount Housing onto a Flat Surface
1. Tape the drill template to the desired location and drill holes at the points indicated.
2. Remove the template and position the housing flat, matching the holes with those on the housing and
screw into place. Refer to Figure 1 .
The AP-200-MNT-W2 mounting kit supports 103 and 204/205 AP models. To ensure proper installation, refer to
sections corresponding to the AP model.
To install the mount housing onto a flat surface, refer to the “Installing the Mount Housing onto a Flat Surface”
section. To install the mount housing onto a wall box, refer to the “Installing the Mount Housing onto a Wall Box”
section.