GCX FLP-0008-53, Руководство по установке, Страница: 2 / 6

DU-FLP-0008-53 Rev C 03/28/16 GCX Corp Page 2 of 6
1
B
Parts Reference
The following parts and hardware are included in this installation kit:
Item # Description Qty
1 Folding L-Bracket Assembly with Flat Panel Mount 1
2 Keyboard tray with Multi-Position Work Surface 1
3 Storage Bin 1
4 1/4-28 x
3/4” Flat Head Socket Cap Machine Screws (FHSCS)
2
5 10-32 x
5/16” Flat Head Machine Screw (FHMS)
4
6 FLP-0002-17 75-100mm VESA Adapter (not shown) 1
Tools Required:
• 5/32” hex wrench (provided)
•
Phillips screwdriver (not provided)
Attaching the L-Bracket to an M Series Pivot or VHM Variable Height Arm
1. Install upper screw with a few turns. Install L-bracket onto upper screw, and locate into top of key hole of bracket.
2. Install lower screw then using a
5/32” Hex Wrench, fasten the two (2) 1/4-28 x 3/4” FHSCS.
(VHM Arm shown below)
3. Use blank label provided to cover screws
– Clean surface before applying the label.
Blank Label
3
1 2
1/4-28 x
¾” FHSCS
3
5
4
2