DU-FLP-0002-17 Rev D 11/17/05 GCX Corp. Page 2 of 3
Mounting Flat Panel Displays
Installation Note:
If mounting pattern is located in deeply recessed area of display housing, see
Using Nylon Spacers
(page 3), then follow mounting procedure on this page.
75 x 75mm VESA Mounting Pattern – Mounting Adapter Not Required
1. Thread M4 screws into top two (2) threaded holes of 75 x 75mm mounting pattern, leaving 4mm of thread exposed.
2.
Lift display onto VESA Mounting Plate by guiding M4 screws into slots in top of Plate (below left). Thread two (2) M4
screws into lower mounting holes (below right). Tighten all screws.
100 x 100mm Mounting Pattern – VESA Mounting Adapter Required
1. Fasten VESA Mounting Adapter to corresponding mounting holes with four (4) M4 PHMS (below left).
2. Follow steps 1 and 2 above to mount display on VESA Mounting Plate.
M4 Screws (2)
VESA Mounting Plate
M4 Screws (2)
M4 Screws (4)
VESA Mounting Adapter
M4 Screws (2)
M4 Screws (2)
75 x 75mm Pattern
100 x 100mm Pattern