GCE Druva MTLX, Инструкция по эксплуатации

Страница: 19 / 46

19/46
EN
DANGER!
•
Depressurize pressure regulator and tubing through consumer. Inlet and outlet pressure gauge show “0”
bar. Appropriate safeguards for personnel are necessary. Note MAK-Values.
•
Unconditionally note that it is not allowed to use the panel with more than proper pressure. Make sure that
nobody is endangered because of start-up of the panel.
6.6 TESTS
•
After pressurizing the complete function of gas supply panel should be tested.
•
Check relief valve, it has to be bubble tight
OPERATION
In reference to chapter 2.1 the operation of panel is defined.
BEWARE!
•
Valves must always be opened slowly and carefully to prevent pressure surges in the system and damage
to the other components!
MAINTENANCE
8.1 SAFETY NOTES FOR MAINTENANCE
NOTE!
•
Maintenance may only be performed by sufficiently qualified, trained and authorized individuals (see sec-
tion 2.4)
8.2 MAINTENANCE PLAN
The following sections describe the maintenance works that must be performed to ensure the optimum and
trouble-free operation of the regulator.
If regular inspections reveal increased wear, the requisite maintenance intervals must be shortened to reflect
the actual wear and tear.
NOTE!
•
Please contact the manufacturer if you have any questions relating to maintenance works and intervals
(see 1.8 for contact details).
Interval Maintenance work Personal
Weekly Check gas supply panel and
gauges visual
Gas-Engineer
Every year Checking function and tightness Gas-Technician
Every 10 years General overhaul and replace-
ment of all wearing parts.
Gas-Engineer
7.
8.