GCE 0870613, Инструкция по эксплуатации

Страница: 3 / 136

EN
3/136
1. DESCRIPTION
GCE proFIT
®
SLM is portable oxy-fuel
cutting machine that cuts unalloyed steel by
material combustion with using of oxygen –
fuel gas preheating flame. This machine can
also be used for linear and circular cutting
or for cutting curved (patterned) profiles
(figures) by moving manually or by installing
additional parts. There is an option to use
second cutting torch if necessary.
GCE proFIT
®
SLM can be used for straight
cutting, curved cutting or bevel cutting with
one or two cutting torches at maximum.
Maximal material thickness to be cut is
150 mm with one cutting torch and 100 mm
with two cutting torches.
Complete machine consists of more parts
to be ordered separately, please see
Fig.1 Machine GCE proFIT
®
SLM
with Zn-coated guide rail
instructions and recommendation below.
GCE proFIT
®
SLM machine can also be used for plasma cutting, preheating and welding but
with additional equipment (not supplied with the machine) and by making necessary changes.
These operating instructions explain safe and efficient operation of GCE proFIT
®
SLM .
GCE proFIT
® SLM
portable cutting machine should be used taking the warnings specified in the
instructions into consideration.
Operators of the machine shall have learnt the content of this Instruction for Use and shall be
experienced with oxy-fuel equipment and trained according to request of ISO, EN or national
standards with respecting all requests of legal authorities.
2. FEATURES
2.1. TECHNICAL DATA
Cutting capacity up to 150mm with one torch, up to 100mm with two
torches
Cutting speed 50-1600mm/min
Operation forward and reverse with variable speed
Power supply 230V AC / 110V AC
Engine supply 24V DC
Oxygen inlet connection G1/4“, up to 8bar, hose min. DN6
Fuel gas inlet connection G3/8“LH, up to 1bar, hose min. DN8
Machine dimensions 175x350x140 (WxLxH) without torch, hoses and torch bar
Weight 9 kg with one torch