Jaguar II User Manual
Installation
2-23
Then turn the roll downward to make an equal tension across the media (Figure 2-37.
4. Engage pinch rollers.
5. Fixes roll media guide bushes on the roll holder to secure the roll media.
6. The protrusion length of the blade should be longer than the thickness of the
vinyl. (Please check the “Blade Specification: About the Tool” in Appendix.) After
you notice all the above, you’ll enjoy your gigantic signs production!
2.12 When Completing the Cutting Job
After completing the cutting job, raise the sheet-loading lever, and then remove the material.
You can also cut off the finished job by the Safe Blade (a standard accessory) along the knife
guide. (Figure 2-38
Make sure that the media tension is
equally distributed from left to right.
If the media is not tight enough
against the platen, it will cause
tracking problems.
Figure 2-37
Figure 2-38
