GC Water NEX RO 500 Скачать руководство пользователя страница 16

WARRANTY

1 Year Limited Warranty for Global Water Treatment Systems

Global Customized Water warranties it’s systems to be free from defects in material and workmanship as follows:

WHAT IS COVERED:

One (1) year from the date of purchase. Pump, motor & electrical controls, filter housings, membrane housings, brackets, storage 

tanks, media tanks, tubing, fittings, gauges, valves are covered for one year provided suggested maintenance is performed.

LIMITS ON WARRANTY:

The design of the overall treatment system and the performance of these systems are related to the chemistry of the water be-

ing treated, this warranty is limited to systems installed on municipal water supplies and installed on supplies within parameters 

specified on performance data sheets. Replacement of pre and post elements is part of the normal maintenance required by 

your systems. These replacements are not covered and preventative maintenance must be performed in accordance with the 

unit guide to maintain this warranty. 

This warranty does not include damage to your system do to:

•  Abuse, misuse or neglect

•  Excessive inlet water pressure (over 90 psi)

•  Excessive water temperature (over 80 degrees F)

•  Freezing, alterations or misapplication

• 

Change in the influent water characteristics

This equipment must be installed and operated in accordance with GC Water’s recommendations and applicable state and local 

codes. The GC  Water  Limited Warranty extends to the original purchaser of the system. This warranty covers all parts and facto-

ry labor needed to repair any GC Water supplied item that proves to be defective in material, workmanship or factory preparation. 

The above mentioned warranty applies for the first full calendar year from date of purchase. Defective items are subject to the 

following exclusions: membranes, filters, 0-rings, and all other parts or components that require regular replacement  as a result 

of ordinary usage herein classified as consumables.

DISCLAIMERS:

This warranty applies only if the system is installed and used in compliance with the instructions  enclosed with the system. The 

Warranty does not cover any non GC Water parts, the costs of repairs or adjustments  to the unit that may be needed because of 

the use of improper parts, equipment or materials, unauthorized alterations of the unit, or failure of a unit caused by such alter-

ations or by unauthorized repairs. The Warranty does not cover malfunctions  of the unit due to tampering, misuse, alteration, lack 

of regular maintenance, misapplication, fouling due to hydrogen sulfide or iron, scaling from excessive hardness, or excessive 

membrane hydrolysis due to chlorine levels in excess of 1.0 mg/L. In addition, damage to the unit due to fire, accident, negligence, 

act of God, or events beyond the control of GC Water are not covered by this warranty.

INCIDENTAL AND CONSEQUENTIAL DAMAGES:

GC Water does not assume responsibility  for payment of incidental and consequential damages as a result of the failure of this 

unit to comply with express or implied warranties, such as lost time, inconvenience, damage to personal property, loss of revenue, 

commercial losses, postage, travel, telephone  expenditures, or other losses of this nature.  Some states do not allow the exclu-

sion or limitation of incidental or consequential damages, so this exclusion may not apply to you.

OWNER’S WARRANTY RESPONSIBILITIES:

Under the provisions of the Warranty, the owner is expected to schedule maintenance,  as described in the Manual that accompa-

nies  the system. Neglect, improper maintenance, abuse, or unapproved modifications may invalidate the Warranty. Should your 

unit develop a defect or otherwise fail to perform in accordance with this warranty, you should contact GC Water or the dealer 

you purchased the product from.

IMPLIED WARRANTIES:

The implied at-law warranties of merchantability and fitness for a particular purpose shall terminate on the date one year after the 

date of purchase. Note: some states do not allow limitations on how long an implied warranty lasts, so the above limitations may 

not apply to you.

OTHER RIGHTS:

This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

PAGE 16

Содержание NEX RO 500

















Отзывы: