GBC 620OS, Руководство по эксплуатации

Страница: 11 / 23

GBC 620os Operation Manual
© 2007 General Binding Corporation Page 11
FEATURES/ACCESORIES GUIDE
V
Y
X
W
Figure 9
Z
A1
Figure 10
B1
C1
D1
E1
Figure 11
NOMENCLATURE PLATE
( Fig. 9– Item V)
The Nomenclature Plate provides the operator the
necessary Technical information such as Voltage,
Amperage, Wattage, Model Number and Serial Number.
MAIN ON/OFF SWITCH
( Fig. 9– Item W)
The Main On/Off Switch supplies power or removes
power from the machine.
FUSES
( Fig. 9– Item X)
The Fuses protect internal PCB’s and motors.
POWER CORD
( Fig. 9– Item Y)
The Power Cord plugs into the Main Power source or
outlet. See (Machine Specs for plug requirements.)
LOCKING PINS
( Fig10– Item Z)
The Locking Pins secure the Film Shaft Latch.
FILM SHAFT LATCH
( Fig. 10– Item A1)
The Film Shaft Latch secures the Supply shaft ensuring
that the film is supported and enters the nip accurately.
PRELAMINATING FILM PERFEORATOR WHEEL
( Fig. 11– Item B1)
The Prelaminating Film Perforator Wheel pierces small
holes into the film to ensure controlled snapping or
separating of images.
FILM CORE CHUCKS
( Fig. 11– Item C1)
The Film Core Chucks secure the film onto the Supply
Shaft.
FILM SUPPLY SHAFT
( Fig. 11– Item D1)
The Film Supply Shaft accepts a 3 inch Core Chuck . The
two Core Chucks slide onto the Film Supply Shaft ,
supporting the film being used. The Film Supply Shaft
has a ruler adhered to the shaft for ease and accuracy when
aligning the film and medias.
TOP FILM IDLER
( Fig. 11– Item E1)
The Top Film Idler guides the film through the nip giving
the film adequate film dwell time.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500