Operating Instructions
Page 6-12
56FM
Pull the laminating film away from the liner and
drape it over the existing film.
Make sure to carefully align the edges of the
films before sticking them together.
Install the feed table and safety shield.
Set the speed for the slowest speed and press
RUN
.
Observe the film being pulled through the
laminator to ensure that the remaining existing
film and the new film are advancing concurrently
and evenly.
Any separation between the films will require
stopping the motor immediately and the situation
corrected.
Press
STOP
once the newly threaded film
completely exits the laminator.
Check the film alignment and adjust the tension
as needed.
See the
Film Alignment
section in this chapter.
9.
10.
11.
12.
13.
14.
D
ECALING
I
N
T
WO
P
ASSES
W
ITH
PSA F
ILMS
Decaling with PSA films is where you laminate items
and then mount them on other materials such as
Foam Core or mounting board. It is performed in
two passes. The first pass laminates and applies
the mounting adhesive, encapsulating the item. The
second pass mounts it on the other material.
This two pass operation requires pressure sensitive
laminating film on the top supply shaft and pressure
sensitive mounting film on the bottom supply shaft.
Note:
The chill idler must be removed for these
processes. Refer to
Removing and Installing the Chill
Idler
in this chapter.
To run the first pass:
Fig. 6-17. Web Configuration for the First Pass With PSA
Film.
Web the laminator as shown in Fig 5-17.
Adjust the roller pressure handle to the proper
laminating setting.
Set the desired speed.
Press
RUN
.
Place the item to be laminated on the feed table
and guide it into the rollers.
When the item has cleared the back of the
laminator, press
STOP
.
1.
2.
3.
4.
5.
6.
Содержание 56FM
