GBC 56FM, Руководство по установке и эксплуатации

Страница: 32 / 41

Page 6-15
Operating Instructions
56FM
To mount and overlaminate with thermal film or
pouch boards:
Preheat the top heat pressure roller to the
desired temperature.
Set the speed to
1
fpm (0.3 m).
Set the roller pressure handle to the proper
setting.
Position the item to be laminated on the board.
Start a board into the heat pressure rollers.
Press
RUN
and guide the item into the rollers.
Press
STOP
when the last item exits the back of
the laminator.
For thermal film, cut the web and trim out the
board if needed.
1.
2.
3.
4.
5.
6.
7.
8.
Fig. 6-20. Configuration for Mounting and Laminating With
Thermal Film.
Fig. 6-21. Configuration for Mounting and Laminating With
Pouch Boards.