MIUM0001_REV01_ RKB_20140130 MIUM ENG.docx
9
• Do not stack the units
• Maximum temperature = 60°C
• Minimum temperature = -20°C
The Manufacturer declines any responsibility for any damage as a result of negligence or lack of protection from
atmospheric agents.
5
–
I
NSTALLATION
&
C
ONNECTIONS
Definitions
CUSTOMER
– The Customer is the person, activity or the society, that has bought or hired the unit, and intends to utilize
the machinery for its intended use.
USER / OPERATOR
– The User or Operator is the actual person that has been authorized by the Customer to utilize the
unit.
QUALIFIED PERSONNEL
- Defined as the person who has followed a relevant specific course of study, and so is able
to understand the dangers derived from the use of the machinery, and in turn, due to this, are capable of solving major
dilemmas.
Safety regulations
Qualified personnel must carry out the installation.
During the installation operation, use protective clothing, for example: glasses, gloves, etc. as indicated by
686/89/CEE and successive regulations.
During the installation operate in absolute security, pollution free air and in an area free of obstructions.
Respect the regulations in force in the country in which the apparatus is being installed. Specifically relative to
its use, and to the disposal of packing and products used for the cleaning and maintenance of the unit. Respect
the recommendations given by the producers of such products.
Before placing in function the unit, check the perfect connection of the various components and the internal
parts of the system.
Avoid at all costs human contact with moving parts and contact with the parts themselves.
Do not commence with servicing or cleaning of the unit, before the unit has been disconnected from the
main supply.
The maintenance and the substitution of damaged or consumed parts must be carried out only by specialized
personnel, following the indications found within this manual.
Spare parts must correspond to the requirements specified by Manufacturer.
In case of dismantling of the unit
,
respect the anti-pollution regulations in force.
N.B.
The installer and the user of the apparatus must take into account, and solve problems, connected with any other
type of risk that may occur to the unit. For example, risks derived from the entrance of foreign bodies, or risks due to the
presence of flammable or toxic gas.
Preliminary operations
Check the perfect condition of the various components of the unit.
Control that contained within the packing, there are the installation accessories, and documentation.
Transport the packed section as close as is possible to the intended place of installation.
Do not place tools or weight on top of the packed unit.
The Manufacturer declines any responsibility for failure to respect the Safety Regulations and the prevention
as described below.
Furthermore, the Manufacturer declines any responsibility for damage caused by the improper use of the unit
and/or modifications carried out without proper authorisation.
