MIUM0001_REV01_ RKB_20140130 MIUM ENG.docx
10
Choosing place of installation
Position the unit on a solid structure, that will not vibrate, and is capable supporting the weight of the machine.
Position the unit in a point where the condensation discharge may occur easily.
Do not position the unit in an area in which flammable gases, acidic or corrosive substances are present. They
may damage various components in an irreparable manner.
Allow a minimum amount of free space as indicated in the following
figure
. This permits ease of installation and
maintenance.
Machine positioning
The unit is equipped with anti-vibration support plates.
Referring to the following
figure
, the following are instructions to fix the unit to its supports :
1. Carry out the drilling of the ceiling, and fit the four M8 threaded bolts (1).
2. Position the unit on the four bolts using the supplied fixing plates (6).
3. Insert antivibrating (2), washer (3) and screw nut (4) and lock nut (5) without blocking.
4. Install the unit with 3 mm inclination towards the condensate outlet to aid the condensation going out.
5. Block the unit tightening the fixing bolts.
