8
EN
Use of the Interface
Switchover of the Sources
In order to call the list of accessible sources, press the
button on the remote control� The navigation between the accessible sources is carried out with the
DOWN/
UP
buttons on the joystick of the control panel. In order to select the required source, press the
button�
Picture 11. Input source
ATV
– Analogue television tuner.
DVB-S
– Satellite television tuner.
DVB-T/C
– Digital television tuner.
AV
– Input of the analogue audio-video signal.
HDMI 1, 2, 3
– HDMI digital audio-video inputs.
VGA
– Input of the video signal from a PC or other devices using the
VGA video-connection type. If this input is selected, the sound is sent
from the 3.5mm line audio input (PC AUDIO), located near the VGA
connector on the lower bound of the TV set.
Picture 12. Menu
To enter the settings menu, use the
button on the remote control (only for
ATV/DVB-C/S2/T2/AV/HDMI/VGA).
The navigation between the menu items is carried out with the
DOWN/UP
buttons�
To move over to a submenu, use the
or
RIGHT
button�
To change the values or select the necessary parameters in the menu items, use
the
LEFT/RIGHT
or
DOWN/UP
buttons�
To return to the previous menu, press the
LEFT
or
button�
To exit the settings menu, press the
button�
Picture 13. Picture Setup
Picture Setup:
In the
Picture Setup
, you may set:
•
Picture mode
(Standard, Dynamic, Mild, User);
•
Colour Temperature
(Warm, Normal, Cool);
•
DNR
(OFF, Low, Middle, High, Auto);
•
Aspect Ratio
(16:9, 4:3, Zoom 1, Zoom 2, Point to Point).
Picture 14. Sound Setup
Sound Setup:
In the
Sound Setup
, you may set:
•
Sound mode
(Standard, Movie, Music, User);
•
Balance
;
•
AVL
(OFF, ON);
•
Digital Audio output
(Auto, PCM, OFF).
