Switching light on/off
Press the light button to switch the lights on or off.
Changing cycling data
The display can show 4 types of cycling data
(D)
. Press Button
A
to switch between these.
The cycling data change in the following order when Button
A
is pressed.
VALUE
EXPLANATION
[GEAR]
Current gear position (Only available with electronic gear shifting)
[RANGE]
Range (The current range based on the selected assistance level)
[DST]
Distance cycled
[ODO]
Total distance travelled
Resetting distance cycled
1. On the main screen: press Button
A
. (Switches the display with cycling data to [DST])
2. Press and hold Button
A
. (Keep the button pressed until the figure for [DST] flashes)
3. When the figure for [DST] flashes: press Button
A
.
4. The cycling data has now been reset.
Assistance whilst walking with the bike
1. Stop and switch to the walk assist mode. Press and hold Button
Y
until icon
(G)
is
displayed
2. Push the bike carefully whilst pressing the same button again. When you release Button
Y
,
the assistance stops.
3. Leave the walk assist mode. Press button
X
10
Turning the light ON/OFF
If a light is connected to the drive unit, this product can be used to operate the light.
1.
Press the light button.
Light button
•
The light power is linked with the main power. The light cannot be turned ON when the main power is OFF.
58
