5
Fig. 1.4.
Manufacture's Plate with Vehicle Identification Data, where:
a — vehicle identification number;
b — gross vehicle weight;
c — gross vehicle weight with trailer;
d — maximum front axle weight;
e — maximum rear axle weight;
f — engine index
2. USEFUL HINTS
1. Procedure of engine starting is described in section 6.2. "Engine Start
ing and Stopping".
After cold engine starting do not run it immediately at high speed because
cold oil passes slowly to rubbing surfaces and they may be got damaged at the
engine high speed.
2. The engine efficient performance and its wear mostly depend on engine
operating temperature. It is necessary to maintain coolant temperature within
the limits of 80–95° C. At the ambient air temperature of 5° C and below in
stall cold weather radiator cover.
3. Do not operate the starter continuously for more than 15 seconds. For
the second attempt of engine starting, allow not less than 30 seconds. Not more
than three engine starting attempts are permissible. Should the engine fail to
fire after these attempts, check the starter power circuits, the starter itself, the
engine fuel system and the storage battery for good condition.
Never move the vehicle using the starter and turn on the starter with the
running engine.
4. After cold engine starting do not run it at high speed. Warm the engine
up at 10001400 rpm. Never drive the vehicle with cold engine. Coolant tem
perature before starting movement should be not less than 40° C.
X96
Д-245.7Е2
33104050140794
7500 кг
-
кг
2400 кг
1-
2-
540 кг
0
a
b
c
d
e
f
LLC AUTOMOBILE PLANT GAZ
“
“ ”
ENGINE
