GAYLORD RSPC-ESP-OW Series, Техническое руководство

Страница: 120 / 124

Appendix F – Startup, Inspection and Tests, Page F-2____________________________________________
ClearAir Start-Up Inspection and Test Report –
Page 1
For RSPC-ESP-OW Series
ClearAir Model Number ___________________________________________________________________
Preliminary Checklist
ESP Section
1. ___ Open all access doors and panels including electrical disconnect panel.
2. ___ Complete a thorough inspection of the unit for any shipping, handling, or installation damages,
and if any make note under Comments.
3. ___ Verify that all debris screens, moisture separators, after filters are in place. See submittal
drawings for details.
4. ___ Verify that all ESP Cells are in place and the high voltage wiring is properly connected.
5. ___ Verify that hot water piping is connected to the hot water inlet.
6. ___ Verify that the drain line is connected and that its size is equal to or greater than the outlet on
the unit drain outlet.
7. ___ Verify that the spare fuses are provided inside the electric disconnect panel.
If Equipped with Media Bed Odor Control
8. ___ Verify that all panels or loose fill modules are in place. If loose, fill modules and verify that they
are filled with media.
9. ___ Verify that the Odor Control Media Monitoring Tube is in place.
If Equipped with Spray Odor Control
10. ___ Verify that the container of spray odor chemical, Gaylord Formula GS-710, is in the spray odor
cabinet and that the pickup tube is inserted into the container.
If Equipped with an Exhaust Fan
11. ___ Verify that the wall insulation in secure and has not loosened in shipment.
12. ___ Verify that all shipping tie downs, bolts and braces have been removed.
13. ___ Verify that the fan floats freely on the spring isolators and the fan wheel turns freely by
rotating the pulleys.
14. ___ Verify that the exhaust discharge in not obstructed and not facing any structure.
15. ___ If a duct system is connected to the exhaust discharge, verify that the connection is
continuously welded.
Facility Name ______________________________
Address __________________________________
City ____________________ State ___ Zip ______
Facility Contact Name _______________________
Facility Contact Phone # _____________________
Facility E-Mail _____________________________
This Report is for ClearAir Unit #_______________
Gaylord Representative Performing Start-Up
___________________________________________
Company Name
___________________________________________
Date of Start-Up _____________________________
Gaylord File Number
__________________________