background image

Pro

 line

Gavita HortiStar 

1000 DE EU/US

1. 

Introduction

Thank you for purchasing the Gavita HortiStar 1000 DE EU/US. Please read and understand this manual completely before 

using the product. Only use the product as specified in this manual. 

1.1. 

Used symbols

   Warning! A warning indicates severe damage to the user and/or product may occur when a procedure is not carried out 

as described.

   Caution!  A caution sign indicates problems may occur if a procedure is not carried out as described. It may also serve as 

a reminder to the user.

  

Note: A note gives additional information, e.g. for a procedure.

    This symbol indicates that the reflector and lamp can reach very high temperatures (>85° Celsius / >185° Fahrenheit). 

Mind a cool down period before performing maintenance.

  With this symbol Gavita declares that this product complies with legal European requirements.

     The symbol on the material, accessories or packaging indicates that this product may not be discarded as household 

waste. Dispose of the equipment through a recycling centre that handles electronics and electrical appliances within the 

EU and in other European countries which use separate collection systems for used electronics and electrical appliances. 

By disposing of the equipment in the proper way, you will be helping to prevent possible risks to the environment and 

public health, which might otherwise be caused by improper handling of the discarded equipment. Recycling of materials 

contributes to the conservation of natural resources. Therefore, please do not dispose of your old electronics and 

electrical appliances via household waste.

    This symbol is an internationally recognized symbol used to designate recyclable materials.

C

US

xxxxxx

   This symbol shows that a product has been independently tested and certified to meet recognized standards for safety. 

A

B

    This symbol indicates the minimum distance (B) between the fixturetype (A) and the lit surface. 

2. 

Product description

The Gavita HortiStar 1000 DE EU/US is a remote reflector. It can only be used when connected to a ballast. The product can be 

used to drive a double ended high pressure sodium lamp, suitable for 750W or 1000W lamps. Only use lamps suitable for open 

reflectors.

The Gavita HortiStar 1000 DE EU/US is intended to be used in climate rooms.

In this manual, the Gavita HortiStar 1000 DE EU/US will be referred to as: “the remote reflector”.

Содержание Pro line HortiStar 1000 DE EU









Отзывы: