11
Pro
line
Pro
line
10.2
Placement and replacement of the lamp
6
Warning!
Always allow for a cool down period of
at least 30 minutes before touching the lamp or
reflector.
1
Caution!
Do not touch the lamp with bare hands
as this will damage the lamp. Always use a fabric
glove to handle the lamp.
1
Caution!
Only use lamps specified by Gavita (see
paragraph 3.3).
2
Note:
The lamp must be replaced every year or
after 5000 lighting hours, whichever one comes
first.
1. Switch off mains power.
2. Hold the lamp with a fabric glove to prevent it
from falling. Use a protective glove if the lamp is
damaged.
3. Open the lamp holders by sliding them outwards
(19).
4. Carefully take the lamp out of the luminaire (20).
5. Install the new lamp with the getter near the
ballast (21), with the glass vacuum seal pointed
downwards (Philips lamps) or sideways (Gavita
lamps).
Both lamp wires need to be placed straight into
the lamp holder and need to touch the metal part
of the lamp holder.
6. Close the lamp holders by sliding them inwards
(22).
7. Switch on mains power.
19
20
A
21
Click!
22
