background image

1

Pro

 line

1  

Introduction

Thank you for purchasing the Gavita Pro 1000e 380-400V DE EU. This manual describes the mounting and installing of the 
product and also describes how to use the product. Please read and understand this manual completely before using the 
product. Only use the product as specified in this manual.

1.1  

Used Symbols

Warning!

 A warning indicates severe damage to the user and/or product may occur when a procedure is not carried 

out as described.

Caution!

 A caution sign indicates problems may occur if a procedure is not carried out as described. It may also 

serve as a reminder to the user.

Note:

 A note gives additional information, e.g. for a procedure.

This symbol indicates that the reflector and lamp can reach very high temperatures (>85 °Celsius). Observe a cool 

down period before performing maintenance.

With this symbol Gavita declares that this product complies with European requirements.

The symbol on the material, accessories or packaging indicates that this product may not be discarded as 

household waste. By disposing of the equipment in the proper way, you will be helping to prevent possible risks 

to the environment and public health, which might otherwise be caused by improper handling of the discarded 

equipment. Recycling of materials contributes tot the conservation of natural resources. Therefore, please do not 

dispose of your old electronics and electrical appliances via household waste.

A

B

This symbol indicates the minimum distance (B) between the luminaire (A) and the lit surface.

2  

Product description

The Gavita Pro 1000e 380-400V DE EU is an adjustable horticultural luminaire. The Gavita Pro 1000e 380-400V DE EU can 
be used to drive a double ended 380-400V high frequency (electronic) high pressure sodium lamp.
The Gavita Pro 1000e 380-400V DE EU is an e-series product. It can be remotely switched and adjusted by a Gavita Master 
controller. The controller can automatically switch the luminaire on and off during a 24 hour cycle.
The controller also offers a temperature safety feature: auto-dimming or switching off connected luminaires when the 
temperature in a climate room becomes too high.
The product can also be controlled by conventional timers in combination with a contactor. Make sure the dummy RJ plug 
sits in the IN port. If not, the luminaire will not operate.
In this manual, the Gavita Pro 1000e 380-400V DE EU will be referred to as: “the luminaire”.

Gavita 

Pro 1000e 380-400V

Содержание Pro 1000e

















Отзывы: