5
7.2
Preparation for use with a controller
Using a daisy-chain setup, a maximum of 100 LED fixtures can be connected to each controller
channel. Up to 500 LED fixtures can be connected with the use of splitters. Refer to Section 7.4.
Using the Fixture:
1.
Without a Controller
a.
The included dummy plug on the input of the first fixture will ensure continuous operation at 100% output. The plug has
a circuit board embedded which simulates 100% output (fig.10).
Warning! Please do not confuse this with a normal RJ45 terminal.
Warning! Only to be used on the “IN” port of the fixtures. Please do not insert this in any OUT port of a fixture (fig.11).
b.
To turn fixtures off, you must rely on line voltage control at this point.
c.
You have the option of daisy chaining explained in Section 7.4 or using a dummy plug in each individual fixture.
4-3/16"
6.
8.
9.
7.
10.
11.
✓
✗
