Gaumard Super Chloe S222.100, Руководство пользователя

Страница: 26 / 44

26 |
User Guide | Omni™ Code Blue® and BP Arm |
Omni
™
Code Blue
®
and BP Arm
Using Omni
™
Code
Blue
Code Blue
®
is a CPR training tool incorporated
in the Omni controller. It was designed to help
teach CPR by monitoring cadence and depth of
cardiac compressions and airway ventilations in
real time.
WARNING
Do not perform mouth to mouth
ventilation since the airway may be
dificult to clean.
MAIN SCREEN
The Omni main screen is divided into three
sections which are, listed from left to right,
the Feedback Graphics, Current Settings, and
Navigation Menus. Pressing each button will
display the menu item in detail.
FEEDBACK GRAPHICS
Monitor and evaluate depth and cadence of
compressions and ventilations in real time.
CURRENT SETTINGS
The current settings are listed on the middle of
the screen. The settings will relect the information
saved during a previous session.
CODE BLUE NAVIGATION MENUS
Edit the simulator settings using the navigation
menus. Select a menu item by pressing the
soft key buttons located on the right side of the
controller. Each menu has additional submenus
or toggle selections. Use the submenus to
decrease, increase, accept, or cancel values.
Use the toggle selection to switch between
available options in the menu.
The Code Blue menus are:
• CPR operational mode: TEST or COACH
mode
• C:V Ratio: customize the compression to
ventilation ratio to match correct guidelines
• Compression/Ventilation Rate: adjust the
number of compressions and ventilations per
minute
• Calib: calibrate the pressure sensor in the
simulator
• BP Arm: gain access to the Blood Pressure
System menus
• Help: universal help menu
MODE MENU
Toggle between the COACH and TEST mode.
The COACH mode generates audible tones to
coach CPR ratio. A high-pitched beep signals
the care provider to perform a compression and
a low pitched-beep signals a ventilation. Toggle
to the TEST mode to perform CPR without the
audible cues.