PREMIE™ Blue S108.250 |
User Manual
Appendix
| 29
7.2 Troubleshooting
Communication/Power Issues
Communication with the simulator cannot be established
Controlling tablet is too far
away from simulator
Minimize the distance between sim-
ulator and the tablet. Should not be
over 10 meters away
More than one device is paired
Open Bluetooth Connection Setup.
Select the Gear to the right and click
“Forget” the network
Manikin is not paired
Disconnect the simulator from the
power supply, turn of bluetooth on
OMNI® 2 tablet. Plug the simulator
back in and turn on bluetooth.
Power supply is not connected
to simulator
Ensure that the power supply is con-
nected to the simulator
Miscellaneous Issues
CPR is not detected
Compression sensor is not
calibrated
Tap the Gear on the top right and
select Calibration. Calibrate the com-
pressions
Ventilations are not detected
Tap the Gear on the top right and se-
lect Calibration. Reset the Ventilations
sensor.
Содержание PREMIE Blue S108.250
Страница 2: ......
Страница 6: ...PREMIE Blue S108 250 User Manual 6 Introduction...