18
6
After Flight Checking
飛行後檢查
深度保養
6. Check flybar, inspec any bent.
Thoroughly Maintenance
檢查平衡桿有無彎曲。
○
○
○
○
○
○
電子系統溫度是否正常
橫軸、主軸、尾橫軸、軸承等是否順暢無誤彎曲並以潤滑油做適當補充。
電子系統是否確實固定無鬆動(請參考5-3)。
傳動齒輪間隙是否正確並保持順暢並無異常磨耗(請參考4-13)。
馬達齒是否與主齒盤正確契合並無異常磨耗。
各部位螺絲是否有確實鎖緊無鬆脫(請參考P.17)。
1. Check all screws, make sure they are all tightened (not loose). Refer to P.17.
2. Check gear mesh between motor gear and main gear. Inspect any abnormal wear.
3. Check gear mesh between transmission gears. Make sure they are running smoothly,
no abnormal wear. (Please refer 4-13)
4. Check electric devices are fixed firmly, not loose.
5. Check Spindle, main axis, tail axis, bearings are all running smoothly, not bent. Apply proper lubricants.
6. Check temperature of electric devices are normal or not.
1. Check all screws are tightened firmly, not loose.
4. Check spindle, main axis, tail axis are running
smoothly, not bent. Apply proper lubricants.
5. Inspec all bearings are running smoothly.
If found any abnormal, please replace new bearings
for safe flight.
2. Check motor gear and main gear correspond
to each other. No abnormal wear or distorted.
3. Check gear mesh between transmission gears
are correct.
That they are running smoothly. no abnormal wear.
橫軸、主軸、尾橫軸、等是否順暢無彎曲並以潤滑油做適當補充。
馬達齒是否與主齒盤正確契合並無異常磨耗或變型。
檢查各部位軸承是否順暢，如有異常請更換該軸承以確保飛行安全。
傳動齒輪間隙是否正確並保持順暢並無異常磨耗。
各部位螺絲是否有確實鎖緊無鬆脫。
GAUI
TAI SHIH HOBBY CORPORATION
GAUI
TAI SHIH HOBBY CORPORATION
