![background image](http://html1.mh-extra.com/html/gaui/x5-3d-flybarless/x5-3d-flybarless_operating-instructions-manual_3802338054.webp)
54
Programming the Speed Controller
1. Call programming mode
• Switch on the transmitter and move the throttle control lever to the full throttle position.
• Connect the rechargeable battery to the speed controller. The motor connected to the controller emits 3 brief sounds
with increasing pitch and two brief sounds after two seconds.
• After another 5 seconds, the connected motor emits 5 brief sounds with increasing pitch.
• The controller is now in programming mode.
2. Call menu item
• In programming mode, you will now hear 14 groups of different signals that are continually repeated in a loop. The
red LED flashes at the same rhythm. Assignment of the respective signal sounds to the menu items can be taken
from the following table.
No.
Sound sequence
Menu item or function
1
1 x brief
Braking
2
2 x brief
Battery type
3
3 x brief
Cut-off mode
4
4 x brief
Cut-off switching threshold
5
1 x long
Start mode
6
1 x long, 1 x brief
Timing
7
1 x long, 2 x brief
Governor mode
8
1 x long, 3 x brief
Unused menu item 1
9
1 x long, 4 x brief
Clock signal
10
2 x long
BEC voltage
11
2 x long, 1 x brief
Unused menu item 2
12
2 x long, 2 x brief
LiPo cells
13
3 x long, 1 x brief
Call default settings
14
3 x long, 2 x brief
Exit programming mode
• To call a specific menu item, slide the throttle control lever to the bottom-most position (motor off) within 3 seconds
of the respective sound signal.
• The speed controller thus switches to setting mode for the menu item called.