GAUI Hurricane EP200 V2 Series, Инструкция по эксплуатации

Страница: 5 / 28

L1
L2
L3
L4
L5
L1
L2
L3
L4
L5
30.5 mm 31 mm 25.5 mm 37.7 mm 35.3mm
Servo and Linkage Installation
Rotate each blade clockwise until
the blades are parellel to the flybar.
(Top View)
Slide the swashplate up or down until
the blades are parallel to the flybar (Left
View). The collective pitch angle is zero
at this position.
Length of each linkage
Servo and linkage setting
1.Adjust the length of the control linkages
as figure below. Make sure that the the
servo arms for CCPM swashplate
are all in the same length.
2.The servos at neutral should have the
servo arms at level position, and the
arm should be 90 degrees to the
control linkage. At this point,the
swash plate and the scissor
arms should be level,and
the pitch should be
set at 0 degrees.
Level
Level