GAUI Hurricane EP200 V2 Series, Инструкция по эксплуатации

Страница: 15 / 28

15T
4.5mm
M3X3
B3X7X2
B3X6.5X6
120T
9T
#203232
Shaft Driven Unit Assembling-1
Distance B =
Adjust the motor
front or rear to make
sure the gear mesh
was set properly.
IMPORTANT:
Make sure to use the non-locktite adhesive or similar material
to adhere the screws while assemble the parts.
Use Locktite 609 , 680 , or
similar material to adhere the
long neck pinion gear to the
motor shaft. ( Make sure the
distance B is correct. )
The side of the one way bearing
which marked some letters on it
should be downward.