雲台校正
此時進入雲台校正程序。
遙控器打開後將機體接上電源，在GU-INS尚未開機前按下SET鍵。
設定前先將螺旋槳取下。
(SET燈閃爍)
此時雲台上下軸所呈現的角度為基準線A。
(伺服機回歸中立點)
7.The angle of the camera gimbal presents would be
baseline A. (The servo will return to its central position.)
Camera Gimbal Calibration
4.For your safety, please remove
the propellers before setup.
5.Turn on the transmitter first, and then connect the battery of
GU-INS the 500X, press “SET” buttom before the initialization
of is completed.
6.The system will start the calibration
procedures.
(“SET” LED light flashes.)
21
A
