GA-600S 3D Wheel Aligner User Manual
v
Basic safety measures during normal operations:
The machine may only be operated by trained and authorized personnel who know
the operating instructions and capable of working with the equipment!
Prior to switching the machine on, check and verify that:
Only authorized personnel are located within the working range of the machine.
No one can be injured when the machine is activated!
Check the machine for visible damages prior to use and verify that it is only operated
in perfect condition!
Report any problems immediately to the supervisor!
Prior to each operating start, check and verify that all safety equipment operates
perfectly!
Basic safety measures during service and maintenance:
Adhere to the inspection and maintenance intervals specified in the operating
instructions!
Block access to the work area of the machine to unauthorized
personnel prior to performing maintenance or repairs! Attach or set up
a warning sign that points out maintenance or repair work!
Pull the power plug prior to any maintenance or repair work or switch
off the main switch for the power supply and secure with a lock, if the
power supply is installed.
The key to this lock must be in the hands of the person that is
completing the maintenance or repair work! Only use perfect load
suspension and lifting equipment when replacing heavy machine parts!
Properly dispose of environmentally hazardous lubricants, coolants or
cleaning agents!
Working on the electrical equipment:
Repairs on electrical equipment of the machine may only be performed
by trained electricians!
Re-attach any loose connections!
Immediately replace damaged lines/cables!
Always keep housings of electrical equipment closed! Access is only
permitted for authorized personnel with key/tools!
Never spray the housing of electrical equipment with a hose when
cleaning!
