Instructions for SW200DC
www.gatexpertstore.com
27
Factory Default
Setting
Cancel factory default setting.
Factory default setting
completes.
10. Others
10.1 Maintenance
Check whether the gate operates normally every month.
For the sake of safety, each gate is suggested to be equipped with infrared protector,
and regular inspection is required as well.
Before installation and operation of the gate opener, please read all instructions
carefully.
We reserve the right to change the instruction without prior notice.
10.2 Error Message
Errors that may occur when the door is operating properly
Wrong Indication
Cause of Error
Solution
Door 1 Obstructed in
opening
1. Check whether there are
obstacles when opening door 1
2. Adjust resistance sensitivity
appropriately
Buzzer
The buzzer is off
The buzzer is on
(
When the mains
is running normally, the buzzer
buzzes short and long. When the
battery is in normal use, the buzzer
buzzes for 6S and then stops. When
the battery power is low, the buzzer
stops after 3 seconds. When the
control board runs incorrectly, the
buzzer buzzes fast and long.)
The buzzer is on
