Instructions for SW200DC
www.gatexpertstore.com
12
Note
To ensure safety and protect the machines, please install a gate stopper at the
open limit position when the gate opens outward to prevent the gate from running
over its travel. Meanwhile, to enable the 2 swings to close to its accurate limit
position, please install a limit stopper at the closed limit position (as shown in
figure 3). Similarly, when the gate opens inward, please install a limit stopper at
the closed limit position (as shown in figure 2).
Before installing the main machine, please make sure the main machine and
components are in good mechanical performance and the gate can be manually
operated flexibly.
One control unit can optionally drive one main machine or two main machines.
Earth leakage circuit breaker must be installed on where the gate movement can
be seen, and the minimum mounting height for the control box should be over
1.5m to avoid being touched by kids.
After installation, please check whether the mechanical property is good or not,
whether gate movement is flexible or not after unlocking, and whether the infrared
sensor (optional) is installed correctly and effectively.
