GATEXPERT PY300DC, Руководство пользователя

Страница: 19 / 26

Instructions for PY300DC
www.gatexpertstore.com
15
Setting the Open and Closed Position
1. Press and hold SET until digital dispalys “1”.
2. Press and hold OPEN until gate opens to a proper open position(The open position will
be determined by customer themselves. Note: Press OPEN, the gate will open, if it’s not
opening, please change the motor wire “T1” and “T2”)
3. Press SET to confirm the open position, the digital will dispaly “2”.
4. Press and hold CLOSE until gate closes to a proper closed position.(The closed position
will be determined by customer themselves.)
5. Press SET to confirm the closed position.
6. After these steps, the gate will automatically run a complete opening and closing cycle.
Figure 19
Adjusting the Auto-close Time:
1. Press and hold OPEN until digital display “
—
”.
2. Press OPEN to add the time for Auto-close, press CLOSE to reduce the time.
3. If the time setting is 0, there will be no Auto-close function.
4. Press SET to confirm.
5. The number increase by 1, the time will add by 10 seconds.
Note: The Auto-close function will work only after the sliding gate runs to open
position.