Instructions for GK SERIES
www.gatexpertstore.com
Dear users,
Thank you for choosing this product. Please read the manual carefully before assembling
and using it. Please do not leave out the manual if you send this product to a third party.
Safety Instruction
1. The industrial door operator should be installed and put into operation by qualified
personnel. Otherwise, serious personal injury or property damage may occur.
2. Installation and wiring must be in accordance with the construction standards and
electrical standards, diameter
≧
1.5mm
2
; power must have a reliable grounding, ground
wire must be reliably connected to the place labeled ground tab, ground lead on the
power line is prohibited to be removed; front end of incoming power line should be
installed with electrical leakage protector which is in line with national standards.
3. This industrial door operator is only allowed to be installed on well-balanced door
which has balance spring, otherwise machine may be damaged due to overload.
4. Door should be flexible and run without stagnation; lead rail end of door must be
installed with mechanical stop block and buffering booster to prevent the door from rolling
out.
5. Control box should be installed in the wall or column of 1.4 meters where the operation
of door can be observed to prevent children from inadvertently touching. While keeping
the remote control, prohibit children to touch or play just in case of danger. Do not use the
remote control when you cannot see the operation of door.
6. Before repairing and moving the door machine and control box, please cut off the
power supply, and make sure that the door has been locked and the risk of falling due to
self-weight is null.
7. Pedestrian and vehicle are prohibited to go through or stay below the running door.
8. Hand-pulled chain on the machine is prohibited to be pulled during the operation of
door machine to prevent the machine from damage.
9. To ensure the safety of pedestrian and vehicle, please install the infrared protection
device and airbag protection device
10. Relevant safety protection devices and the operation of the door should be checked
frequently to ensure the security and stability of door.
