GATEWORKS AVILA GW2345, Руководство по эксплуатации

Страница: 15 / 22

Avila Network Computer Operating Manual
15 of 22
CompactFlash Socket (J5)
The pin assignment for the industry standard CompactFlash socket is shown
below. The CompactFlash is connected to the expansion bus on the IXP
processor. The GW2345 CompactFlash connector signaling is illustrated in the
following table.
Pin Signal Connect Pin Signal Connect
1 Ground Ground 26 CD1# No Connect
2 D3 EXP D3 27 D11 EXP D11
3 D4 EXP D4 28 D12 EXP D12
4 D5 EXP D5 29 D13 EXP D13
5 D6 EXP D6 30 D14 EXP D14
6 D7 EXP D7 31 D15 EXP D15
7 CS0# EXP CS1# 32 CS1# EXP CS2#
8 A10 EXP A10 33 VS1# No Connect
9 ATASEL# Ground 34 IORD# EXP RD#
10 A09 Ground 35 IOWR# EXP WR#
11 A08 Ground 36 WE# Pull Up
12 A07 Ground 37 INTRQ No Connect
13 VCC VCC 38 VCC VCC
14 A06 Ground 39 CSEL# Ground
15 A05 Ground 40 VS2# No Connect
16 A04 Ground 41 RESET# RESET#
17 A03 Ground 42 IORDY# No Connect
18 A02 EXP A2 43 INPACK# No Connect
19 A01 EXP A1 44 REG# Pull Up
20 A00 EXP A0 45 DASP# No Connect
21 D00 EXP D0 46 PDIAG# No Connect
22 D01 EXP D1 47 D08 EXP D8
23 D02 EXP D2 48 D09 EXP D9
24 IOCS16# No Connect 49 D10 EXP D10
25 CD2# No Connect 50 GND GND
CompactFlash Connector
Ethernet Connectors (J6, J8)
The GW2345 contains two 10/100 Base-TX Ethernet channels. Both Ethernet
channels are available through standard 8-pin RJ45 connectors. The J8 Ethernet
connector supports passive power over Ethernet. This enables the GW2345
operating voltage to be provided through the Ethernet connector rather than the
Power connector. The input voltage requirements are given in Section 3,
Specifications.