Gateway M1200, Руководство пользователя

Страница: 8 / 82

4
Chapter 1: Checking Out Your Gateway Tablet PC
www.gateway.com
Power switch side
Item Function
Power connector Plug the AC power adapter into this connector. Do not substitute
another adapter or use this connector for any other purpose.
Power switch
■
Turn on the tablet by sliding and holding the switch for about
½ second.
■
When the Gateway Tablet PC is on, slide the switch briefly to
activate Standby (or Hibernate if it is enabled through the Control
Panel’s Power Options Properties dialog box).
■
Sliding and holding the switch for more than 4 seconds (when the
tablet is turned on) will cause a forced shutdown, which is the last
resort when the tablet is completely unresponsive.
Antenna zone The wireless networking antennas are located in this area. Be sure
to keep your hands clear of this zone when using wireless
connectivity in areas where reception is weak.
PC Card slot Holds one Type-II PC Card for networking, memory expansion, or
peripheral connections. A plastic blank ships with the Gateway
Tablet PC, and you can leave it in place whenever the slot is not in
use.
Pen tether
anchor Use this tether anchor to tether the pen to the tablet.
Power
connector
Power switch
Antenna area Pen tether
anchor PC Card slot