background image

Technical Support
See the label on the bottom of the notebook for Customer Care Information. See 
your Reference Guide for important safety, regulatory, and legal information.

© 2008 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks 
or registered trademarks of Gateway, Inc. in the United States and other countries. 
All other brands and product names are trademarks or registered trademarks of 
their respective companies.

Replacing the keyboard

15 Lift the back edge of the keyboard slightly, then slowly slide it 

toward the LCD panel to release the keyboard retaining tabs 
located on the front edge of the keyboard.

16 Slide the brown keyboard connector clips to the back of your 

notebook, then slide the cable out of the clips. Be careful not to 
touch or damage any other components.

17 Remove the old keyboard.

18 Place the new keyboard keys-up on your notebook with the space 

bar toward you.

19 Make sure the brown keyboard connector clips are fully moved 

toward the back of your notebook, insert the cable into the 
connector, then slide the brown clips to lock the connector in place.

20 Insert the tabs on the front edge of the keyboard into the slots 

under the palm rest. You may need to press down on the keyboard 
keys along the front edge of the keyboard to seat the retaining 
tabs into their corresponding slots.

21 Gently press the keyboard down until it is flat all the way across. 

The keyboard should easily fall into place. Be careful to not 
damage the LCD panel.

22 Replace the screws removed in Step 14.

23 Replace the keyboard cover. Press down on the cover in several 

places until it clicks in place. The cover is correctly mounted when 
you can run your finger along the cover and find no loose spots. 
The cover should be flat all the way across.

24 Close the LCD panel.

25 Turn your notebook over so the bottom is facing up.

26 Replace the screw removed in Step 9.

27 Slide the battery into your notebook until it snaps into place.

28 Slide the battery lock to the locked position.

29 Turn your notebook over.

30 Connect the power adapter, modem cable, and network cable

31 Reconnect all peripheral devices and replace any Express cards.

Important

The keyboard cable is correctly oriented if it is not twisted.

Clip

Clip

Caution

If the cover is not correctly replaced, your notebook could be 

damaged when you try to close the LCD panel.

2

Содержание M-1628















Отзывы: