Gateway LD-220, Руководство по эксплуатации, Страница: 11 / 51

www.gateway.com
FRONT PANEL INFORMATION
9
1. POWER BUTTON
Press it to turn the power of the unit between the
standby and off modes.
Pressing the FUNCTION key(9) in the standby mode,
the unit will turn on.
2. DISIC TRAY
3. RESET
Reset the whole system (including the memory
set).
Note: Only the professional can use this RESET
function.
NOTE: Back-up Memory Function
This is the function that preserves the preset memory
and most-recent memory function. In the event of a
power failure, or if the power cord of this unit is
disconnected from the electric outlet, the back-up
memory will preserve the preset memory and most-
recent memory functions for as long as approximately 7
days.
If the power supply is interrupted for 7 days or longer, the
memory settings will be erased.
When to use RESET switch
• When this system is subjected to an electrical
shock.
• When the power is interrupted.
In this case, try the following:
Switch on the POWER, use a paper clip to press the
RESET button for more than 3 seconds duration.
If the RESET button is pressed for more than 3
seconds, all the current set up memory will be erased.
4. key
Press it to open/close the disc tray.
5. / Start/Pause playing
6. Skip to previous chapter or track.
7. Skip to next chapter or track.
8. Stop playing
9. FUNCTION key
Choose among DVD, VIDEO, FM, AM (MW) &AUX.
10. VFD DISPLAY UNIT
11. VOLUME / Volume up and down.
12. PHONES
Connect to headphones.
This is the jack for the headphones. Connect the plug
on the stereo headphones for private listening.
Adjust the volume so that it does not hurt your ears
when using the headphones.
If you do not intend to use your headphones, always
ensure that you unplug them.