Gateway EC14, Руководство пользователя

Страница: 53 / 222

www.gateway.com
47
Example router-based Ethernet network
The following is an example of a wired Ethernet network. The network is made up
of a router, a cable or DSL modem, your computers, and cables connecting each of
these components. The router is the central control point for the network.
Attached to the router are all of your computers or Ethernet-ready devices. Also
connected to the router is a cable or DSL modem that provides access to the Internet.
Equipment you need for a router-based Ethernet network
For a wired Ethernet network you need:
•
Two or more computers with Ethernet jacks
•
One router
•
One broadband Internet connection (optional)
•
Ethernet cables connecting all of the network equipment
When buying your router, be sure the model includes everything your network needs,
including:
•
Internet security features, such as a firewall, to protect your network from
unwanted intruders
•
4-port switch to eliminate the need for additional network hardware
•
DHCP server/dynamic IP address assignment to automatically configure network
and IP addresses
Tip
To add the ability to access a wireless Ethernet network to your wired
Ethernet network, connect an access point to the router or use a router that
has a built-in access point.
Important
For best results, all Ethernet components should be either standard
Ethernet (10 Mbps), Fast Ethernet (100 Mbps or 10/100), or Gigabit Ethernet
(1000 Mbps or 10/100/1000). A mixture of components rated at different
speeds will result in your network running at the speed of the slowest rated
component .
Cable/DSL
modem
Router