Gateway ADC-220, Руководство пользователя

Страница: 21 / 97

17
Connecting the player
www.gateway.com
■
Digital audio (coaxial)
Connect one end of a digital coaxial cable (not included) to the
COAXIAL
jack on the back of the player, then connect the other end
to the coaxial digital audio jack of your amplifier.
■
Digital audio (optical)
Connect one end of an optical cable (not included) to the
OPTICAL
DIGITAL AUDIO
jack on the back of the player, then connect the other
end to the optical digital audio jack of your amplifier.
Installing the network card
Do not plug in the player’s power cord or press the POWER button on the front
until you have installed the network card.
To install the network card:
1
Make sure that the player is turned off.
2
Insert your network PC Card (one may have been provided with your
player) into the
NETWORK CARD
slot in the back of the player. Make sure
that the network card is pressed all the way in.
Tips & Tricks If you are using a digital audio connection (COAXIAL or
OPTICAL DIGITAL AUDIO), you must set the audio output
format to match the digital decoding capabilities of your
amplifier. For more information, see “Setting up digital
audio” on page 39.
Network card slot