Gateway 9715, Руководство пользователя

Страница: 26 / 278

21 www.gateway.com
Controlling your server
Keystroke mappings
During console redirection, the remote terminal (which may be a dumb terminal or a
system with a modem running a communication program) sends keystrokes to the local
server. The local server passes video back over this same link. The keystroke mappings
follow VT-UTF8 format with the following extensions.
Setting up alias keys
The D
EL
and CTRL + (function key) combinations are synonyms for the F2 or Setup key.
These are not prompted for in screen messages. These hotkeys are defined only for console
redirection support and are not used on locally attached keyboards.
Standalone E
SC
key for headless operation
To complete an escape sequence, the timeout must be two seconds for entering additional
characters following an escape.
■ E
SC
followed by a two-second pause is interpreted as a single escape.
■ E
SC
followed within two seconds by one or more characters that are not forming a
sequence described in this document are interpreted as E
SC
+ the character, or
characters, not an escape sequence.
All of the escape sequences in the following table are input sequences, that is, they are
sent to the BIOS from the remote terminal.
Escape Sequence Description
E
SC
+
R
+
E
SC
+
R
+
E
SC
+
R
This will implement but will default to “disabled.”
REmote console reset
E
SC
+
(
BMC Mux switch escape sequence
E
SC
+ CDZi + (terminal-type-number) Dynamic Terminal Type choice, where:
0 = PC-ANSI (the only current terminal type)
1 = VT100 (not implemented, but honored as VT100+)
2 = VT100+
3 = VT-UTF8
E
SC
+ CDZ0 Inhibit console redirection
E
SC
+
CDZ1
Restart console redirection
E
SC
+ CDZ2 “Soft” inhibit console redirection, without serial port or
modem reset.
8510702.book Page 21 Thursday, July 7, 2005 11:21 AM