Gateway 7001 Series, Руководство пользователя

Страница: 125 / 218

120
www.gateway.com
3
Configure a WDS interface for data exchange with MyAP2 (for example).
Start by typing the MAC address for MyAP2 as the “Remote Address” and fill in the
rest of the boxes to specify the network (guest or internal), security, and so on. Save
the settings (click
Update
).
4
Click
Advanced—>Radio
on the Administration Web page to verify or set the mode
and the radio channel on which you want MyAP1 to broadcast.
Remember that the two access points participating in the link, MyAP1 and MyAP2,
must be set to the same Mode and be transmitting on the same channel.
For our example, let us say we are using IEEE 802.11b Mode and broadcasting on
Channel 6. (We would choose Mode and Channel from the lists on the
Radio screen.)
5
Now repeat the same steps for MyAP2:
• Open Administration Web pages for MyAP2 by using MyAP2’s IP address in a URL.
• Click
WDS
on the MyAP2 Administration Web page. (MyAP2’s MAC address will
show as the “Local Address”.)
• Configure a WDS interface for data exchange with MyAP1, starting with the MAC
address for MyAP1.
• Navigate to the radio settings for MyAP2 to verify that it is using the same mode
and broadcasting on the same channel as MyAP1. (For our example, the Mode is
802.11b and the channel is 6.)
• Be sure to save the settings by clicking
Update
.
Updating settings
To apply your changes, click
Update
.