Novitool® AERO™ Portable Splice Press Welding Guidelines
FC9 and FC12
Novitool® AERO™ Portable Splice Press Welding Guidelines – V6
Page 33
3. Before starting the weld cycle, remove the clamping bars completely from the press. Push the start button
twice
on the top platen above the digital screen (green button) to start the cycle.
A. All temperature control options must be complete
4. Cooling and removing the belt. Maximum temperature before opening the press is 150° F. When the
welder completes the welding and cooling cycles:
A. Release the pressure using the RED button on the bottom next to pressure regulator digital screen.
B. Loosen the side bolts
C. Remove the top platen
D. Check the joint weld area for good flow.
Release Pressure Using the RED Button
Green Start Button
Cool Down Temperature
