Novitool® AERO™ Portable Splice Press Welding Guidelines
FC9 and FC12
Novitool® AERO™ Portable Splice Press Welding Guidelines – V6
Page 25
Belt Preparation
– FC9 and FC12
Finger Cut Directions
1. Flat belt should be prepared following a traditional flat belt finger pattern such as 20mm x 70mm. In the
event that a finger cannot be punched, the belt preparation process described in CC40 section can be
used.
Press Assembly
– FC9 and FC12
1. Place Teflon sheet.
Add Teflon Sheet
