background image

 

Operating Manual MCX50 

Gates Europe NV Fluid Power- 21 - 

www.gates.com/europe

 

 

6.3 Warranty and liability 

 
 
As a rule our "General Terms and Conditions of Sale and Delivery" shall apply. These are available to the 
buyer on demand. Warranty and liability claims for injuries to persons and/or damage to property shall be 
excluded if such claims can be attributed to one or several of the causes listed below: 
 
 
• 

Use of the machine not to the intended purpose. 

• 

Improper assembly, start up, operation and/or maintenance/repair of the machine. 

• 

Operation of the machine without the protective coverings being mounted correctly. 

• 

Non-observance of the information concerning the transport, storage, assembly, start up, 
operation and maintenance of the machine provided in the operating manual. 

• 

Unauthorized constructional changes on the machine. 

• 

Unauthorized modification of programs that affect the control of the machine. 

• 

Inadequate inspection of wearing parts. 

• 

Incorrectly performed repair work. 

• 

Emergencies due to external causes and/or force majeure. 

 
Gates Machines are guaranteed against defects and faulty workmanship for a period of one year from 
date of purchase.  
 
 

Содержание MCX50























Отзывы: