GC®32TSi™ Safety and Operation Manual | 5
CRIMPER INSTALLATION
The crimper is top heavy and weighs 660 lbs (300kg)
›
Follow the correct set-up procedure as shown in this manual
›
Failure to follow proper procedures can create risk of severe injury and/or damage to the crimper
›
DO NOT
lift crimper by head. Use lifting anchors on crimper base.
Assemble the optional crimper stand, if using. The crimper stand
MUST be secured to the floor.
STORE AND INSTALL DIE SETS
Using the Quick Change Tool (QCT), load dies into the front and/or
back of stand, in optional rack or store in plastic shipping tubs.
Remove the plastic wrapping from the outside of the box.
Remove the staples from the bottom and top of carton with a
screwdriver and pliers.
Slit the tape on the top of the carton with a sharp knife, then open
the lid and remove the wooden side supports.
GC32TSi Safety and Operating Manual-A4.indd 5
1/11/17 12:37 PM
