background image

21

WARRANTY

GC16XD MINI CRIMPER & PUMP SAFETY & OPERATION MANUAL

TWO-YEAR LIMITED WARRANTY ON EQUIPMENT

 

For two years from the date of shipment of the equipment to the original user, Gates will, at 

its option, replace or repair any unit which proves to be defective in material or workmanship, 

or both, at no cost to the original user of the equipment. Warranty claims require proof 

of purchase. This is the exclusive remedy. THERE IS NO OTHER EXPRESS OR IMPLIED 

WARRANTY. ALL INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE, ARE LIMITED TO TWO YEARS FROM DATE OF SHIPMENT OF THE EQUIPMENT TO 

THE ORIGINAL USER. LIABILITY FOR CONSEQUENTIAL AND INCIDENTAL DAMAGES UNDER 

ANY AND ALL WARRANTIES IS EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW. 

Some states do not allow the exclusion of incidental or consequential damages, and some 

states do not allow limitations on how long an implied warranty lasts, so the above limitation 

and exclusion may not apply to you. This warranty gives you specific legal rights and you may 

also have other rights which vary from state to state. For warranty service, contact Service 

Department, Gates Customer Solution Center, 330 Inverness Dr. S, Englewood, CO 80112.

FOR WARRANTY SERVICE, CONTACT  

Service Department, 

Gates Customer Solution Center, 

330 Inverness Dr. S, 

Englewood, CO 80112.

Attn: Marty Bauer

303.618.0043

[email protected]

For selling prices on inventoried parts, refer to Hydraulic Equipment and Parts List Price Schedule. Selling prices 

for parts not shown in these lists will be furnished on request, or parts will be shipped at prevailing prices and 

you will be billed accordingly. For information regarding prices, contact your local Gates representative or your 

Customer service Prepresentative.

Gates Corporation

1144 Fifteenth Street, Suite 1400

Denver, CO 80202, USA

1.800.366.3128

GATES.COM

Содержание GC16XD

























Отзывы: