21
© 2011 Gates Corporation
EZ ALIGN is a registered trademark of Gates Corporation
The final step is to operate the belt drive system for a few
hours, allowing the belts to stretch and seat properly in the
pulley grooves. The belt tension level should then be checked
to make sure it is within manufacturer’s recommendations for
new belts. Now operate the belt drive for at least 72 hours.
The belt tension level should be checked again to make sure it
is within manufacturer’s recommendations for used belts.
Before operating the machinery check to make sure all tools
and equipment have been stowed securely, and all guards
have been securely replaced.
MAINTENANCE
The
GATES EZ ALIGN
®
is designed with durable aluminum
housing designed to withhold harsh environments. However,
as with any precision instrument, care should be taken to avoid
unnecessary abuse.
1. The lenses of the transmitter and reflector windows are
coated with a high performance film. To clean, use a lint
free cloth or swab using a premium glass cleaner solution.
2. The outside aluminum housing may be cleaned with a clean
damp cloth.
REPAIR / SERVICE INSTRUCTIONS
1. Pack the equipment securely for shipment in the original
carrying case.
2. Enclose a note or letter including contact information and
the nature of the request or problem. If the unit is under
warranty, provide confirmation of the purchase date.
3. If requested, estimates for non-warranty repairs will be
provided, otherwise work will begin as soon as possible.
4. Return the equipment prepaid and insured to the
GATES
CORPORATION
Service Center. For quick turn around, “2
nd
Day Air” or air shipment is recommended.
22
© 2011 Gates Corporation
EZ ALIGN is a registered trademark of Gates Corporation
There will be no charge for repairs within the warranty period
due to defective materials and/or workmanship after the unit
has been received.
FOR REPAIRS SEND UNITS TO:
GATES CORPORATION
c/o Seiffert Industrial, Inc.
Attn: Service Department
1323 Columbia Drive, Suite 305
Richardson, TX 75081 USA
800-777-6363
STATEMENT OF LIMITED WARRANTY
GATES CORPORATION
warrants the
GATES EZ ALIGN
®
to be
free of defects in material and workmanship for a period of two
(2) years. This twenty four (24) month warranty period begins
when the unit is received by the purchaser.
GATES CORPORATION
will repair or replace, at its option, any
defective part of components of which notice has been given
during the warranty period. Travel and per diem expensed, if
required, to and from the place where repairs are made, will be
charged to the purchaser at the prevailing rates.
Customers should send units to
GATES CORPORATION
(use
address above) for warranty repairs; freight prepaid.
Any evidence of negligent, abnormal use, or accident with
exception of the previously stated warranty or an attempt to
repair equipment by other factory authorized personnel using
GATES CORPORATION
certified or recommended parts,
automatically voids the warranty.
