The CX700 / CX560 Setup
Page 8
Camera Preparation
Your Sony camera will need some preparation before installing into the housing.
Remove any lens caps or external lenses
you may have added to the front of the
camera.
Install
a charged battery.
Tighten the hand strap
to its shortest position and tuck the ‘tail’ back into the hand
strap.
CAUTION
: Failure to perform this step may result in the hand strap becoming caught
in the housing seal and accidental flooding.
Install the camera onto the CM
using one of the short ¼-20 flat head screws by
threading into the tripod mount found on the bottom of the camera. A screwdriver or
coin may be used to tighten snug, but do not over tighten.
Remove any lens
caps or filters.
Tighten the handstrap to
its shortest position.
Install the CDM as shown.
Tighten the ¼-20 screw
gently and snug.
